DCA/G164/9 - Elevator Torque Tubes - Inspection. 4 <applicability> <applicability> <p> <span> Models G-164 and G-164A that have elevators with S/N 461 and below.</span> </p> </applicability> </applicability>
DCA/LYC/159 - FAA AD 77-20-07 Intake/Exhaust Valve Rocker Arm Retaining Studs - Replacement 4 <applicability> <applicability> <p> <span> O-320-H series engines S/N 101-76 through 2182-76.</span> </p> </applicability> </applicability>
DCA/DC3/147 - Brake Installation - Inspection. 7 <applicability> <applicability> <p> <span> All model DC-3 and C-47 series aircraft.</span> </p> </applicability> </applicability>
2018-02-08 - Main Rotor Blades <applicability> <applicability> <p> <span> Model 204B, 205A and 205A-1 helicopters fitted with a Helicopter Technology Company (HTC) main rotor blade P/N 204P2100-101.</span> </p> </applicability> </applicability>
DCA/PA-25/119 - Fuselage Upper Longerons - Modification. 6 <applicability> <applicability> <p> <span>Model PA-25-235 aircraft, S/N 25-02 and 25-2000 through to 25-3731 not incorporating Piper kit 756987.</span> </p> </applicability> </applicability>
DCA/DC3/121A - Elevator Hinge Brackets - Modification. 4 <applicability> <applicability> <p> <span> All model DC-3 and C-47 series aircraft.</span> </p> </applicability> </applicability>
DCA/PA-25/118 - Operating Limitation Placard - Installation. 6 <applicability> <applicability> <p> <span>All model PA-25 aircraft fitted with Lycoming O-320 series engine and Marvel Schebler carburettor model MA-4SP, P/N 10-3678-32.</span> </p> </applicability> </applicability>
DCA/DC3/119 - Hydraulic System - Modification. 4 <applicability> <applicability> <p> <span> All model DC-3 and C-47 series aircraft.</span> </p> </applicability> </applicability>
DCA/G164/7 - Landing Wire Attachment Lug - Modification. 3 <applicability> <applicability> <p> <span> All model G-164B prior to S/N 420B</span> </p> </applicability> </applicability>
DCA/LYC/125 - FAA AD 63-23-02 Exhaust Valve Guides and Camshafts - Inspection <applicability> <applicability> <p> <span> O-320, O-320-A -B -C -D -E engines with S/N as listed in SB 293B</span> </p> </applicability> </applicability>
You are here Home Aircraft Airworthiness Type acceptance reports Sikorsky S-76 Series Revision 2 Sikorsky S-76 Series Revision 2
DCA/CESS120/12 - Cabin Heat System <applicability> <applicability> <p> <span> Model 120 aircraft, all S/N fitted with a Lycoming engine per McKenzie Aircraft Repair, Inc. Supplemental Type Certificates Nos. SA4-95, SA4-173, SA4-376, SA4-581, SA4-629, SA4-639, SA4-640, SA4-641, SA4-642, SA4-1159, SA4-1201 and SA4-1286, and with FAA Engi...
DCA/DC3/144 - Geared Rudder Tab - Modification. 7 <applicability> <applicability> <p> <span> All model DC-3 and C-47 series aircraft.</span> </p> </applicability> </applicability>
DCA/EXMIL/6A - Horizontal Stabiliser Spar <applicability> <applicability> <p> <span> All model Harvard 2 (AT-6), Harvard 2A (AT-6C), Harvard 3 (AT-6D and SNJ-5), Harvard 4 (AT-6F and SNJ-6), SNJ-7 and T-6G series aircraft fitted with single piece design horizontal stabilizer rear spar connector fittings P/N 77-21021 (4 fittings per spar).<...
DCA/ELECT/20 - BTH Magnetos <applicability> <applicability> <p> <span> BTH Type AG 4 and SG 4 magnetos not identified by stamp "CV 419" on the casing at the drive end. These magnetos are used on but not limited to DH Gipsy Major Series engines.</span> </p> </applicability> </appli...
